Teach you to quickly replace iphone 6 battery

Iphone 6 battery is often the first cell phone damage, like this phenomenon, only need to replacement a new iphone 6 battery, you can easily solve the problem. If you want to replacement your iphone 6 battery, you can look at the following related tutorials.

Required tools:

Iphone 6 replacement battery

Special screwdriver

Picking the screen sucker

Replacement steps and methods:

1. Open the iPhone 6 ​​you only need to unscrew the two screws

2. Turn off the phone and use the pentagonal screwdriver in the kit to remove the screw. The head of the screwdriver is small, but it matches the small screw at the bottom of the iphone 6.

3. Use the suction cup to pull the screen above the home key. The sucker fixed in the home button on the top of the other hand holding the fuselage, and then pull out. You only need to pry between the screen and the fuselage enough to plug into a plastic sheet of space.

4. Use pry pieces to pry out the screen. Start from the home page key around the screen bit by bit.

5. Position the screen up 90 degrees, but do not exceed this angle. The top of the screen is still connected with the fuselage, so do not pull hard.

6. Locate and remove the screws that secure the screen. It is a good idea to remove the screen when removing the battery, because the battery is fixed with glue, it may be cumbersome to remove it. Unscrew the screws on the protective cover and remove the protective cover

7. Unscrew the connector on the screen. There are several connectors between the screen and the fuselage, you can use a small dial or thin nail file to pick them out from the port.

8. Remove the battery connector cover. The battery connector cover is secured by two screws, unscrew them, and then remove the metal cover

9. Remove the battery connector. There is only one connector between the battery and the circuit board, you can use a small dial or thin nail file to pick it up.

10. Heat the back cover with a hair dryer to soften the glue. IPhonee 6 ​​uses a lot of glue to fix the batteries, they need to soften the battery to take down. You can use the hair dryer to heat the phone back cover, to soften the purpose of glue. Do not use the heating tool with a higher temperature than this, to be comfortable with the heat that will put the phone in hand for the degree.

11. Use a credit card or plastic paddle to pry the battery slowly. You can use a bank card, thin paddle or file to pry the battery at the bottom a little bit. Avoid the top of the screen connector near the part, because the following also hidden connector. Also, do not take the phone parts when prying the fulcrum of the battery. Try to keep the glue on top of the case, so that you can re-use it later.

12. Connect the new battery and fold the connector. If you do not have too much glue left, you can use the ultra-thin double-sided adhesive to fix the new battery. The connector only needs to be able to return to the slot with a little bit of force, but the alignment position may be a bit cumbersome and takes some time. The original battery connector is folded down, so now the same. As shown, you can press it with a small dial or thin metal file.

13. Reconnect the screen connector, reinstall the metal protective cover of the battery and the screen connector. Follow the screen connector in the reverse order, starting with the connector on the top of the fuselage and reinstalling the metal protective cover. Close the case and install the screws.


In this way, your iphone 6 battery is easily replaced.