Quickly replace iphone 6 battery

Iphone 6 battery use more than 500 times, it will only 80% of the electricity, then your phone life will become very short, you need to always charge, which is undoubtedly unacceptable. Why replace iphone 6 battery? Replace the iphone 6 battery, you can make your iphone 6 battery life to be reborn. The following will provide you with the details of the replacement iphone 6 battery steps, you can easily replace the battery.

Replacement of iphone 6 batteries required parts and tools:

Iphone 6 battery replacement

IPhone Repair Kit, Buy Now

Step 1: Find the phone lightning interface (two pentagon screws on both sides.

Step 2: Turn off the phone and use the pentagonal screwdriver in the kit to remove the screw.

Step 3: Use the suction cup to pull the screen above the home page key.

Step 4: Use the plastic sheet in the kit to pry out the screen.

Step 5: Set the screen to 90 degrees, but do not exceed this angle.

Step 6: Locate and remove the screws that secure the screen.

Step 7: Open the connector on the screen.

Step 8: Remove the battery connector cover.

Step 9: Remove the battery connector.

Step 10: Heat the back cover with a hair dryer to soften the glue.

Step 11: Use a credit card or plastic paddle to pry the battery slowly.

Step 12: Connect the new battery and fold the connector.

Step 13: Reattach the screen connector, reinstall the metal protective cover of the battery and the screen connector.

Step 14: Close the case and install the screws.

Put the screen back into the chassis, you first need to move down a few millimeters, and then slide up into the case, but be careful not to stretch the screen protector. Next, twist the small screws on both sides of the lightning interface.


These are the complete steps to replace the iphone 6 battery, you follow this tutorial to replace, is undoubtedly very simple.