How about mobile phone battery 5 error to be used

In the use of mobile phone batteries, the use of these mistakes if you have the following error, so we strongly recommend that you change in time.

A charger, a less known and inferior brand can damage your battery

Although some of the less known and inferior brand charger is not the most ideal choice, some even need more time to the battery is full of it. However, as long as you use correctly, this kind of charger will not damage the battery. And what this means is that we can visit mpbatt.com, to buy a cheap charger to replace the original factory of mobile phone configuration charger. But need to pay attention to when choosing spare charger, charger need to find a suitable for your equipment.In addition, don't buy what 15 minutes to recharge cell phone use eight hours of battery charger.

Second, don't in charge, while the use of mobile phones

People might think that using cell phone while it is charging, it will adversely affect the quality of mobile phone charging.

However, unless you are using inferior charger, otherwise, this statement is not accurate.

Whatever you have in the use of mobile phones, battery charge will be in the same way as expected.

We can so to think about this question: when you close the mobile phone, mobile phones are not produced in the data synchronization, but even if you did not use a mobile phone, as long as the boot, your phone will appear in the data synchronization, so it has nothing to do with a call.

Third, battery charging all night destroyed damage

Error!

Most smartphones now have enough intelligence, they know when the battery has already saturated, then stop charging.There is, however, a method to extend battery life.Not every night, all night charge, try in most cases for the battery charged to 40% - 80%, so you can ensure that your battery life as long as possible.If you can come up in the evening unplug, it might as well try.

Four, before the use of mobile phones for the first time you can best full of battery
Many people think that when we buy back the mobile phone, the first thing should be plugged in.

Remember, smart phones battery is from 40% to 80% of the best work state power.
Given that most of the mobile phone when leaving the factory, there are 50% of the battery, so you'd better look at the instructions: if you are using a new smart phone for the first time, the battery power less than 40%, you may want to consider to take back to change, because the battery has been used.

Five, turn off the phone to cell damage

And, of course, if a long time without the use of mobile phones, the battery will be exhausted, but every once in a while if you turn off the phone for a moment, just do not have what problem.If you like, you can also turn off the phone, take out the battery, it will not affect the battery.In fact, for the part of the phone, simply reboot the system also can help to restore the battery function.


These are what we summed up five error introduced about mobile phone battery, hope to help fellow users a better use of mobile phones.

Experts teach you to make iphone battery life longer

Iphone battery life is short, this is a lot of users upset a problem. In the premise can not change the hardware, in fact, we can set some of the functions of the phone to add an indirect way to extend the iphone battery. The following list of these is to improve the iphone battery life method, we are honored to be available to everyone.

1. Turn on Low Power Mode

IPhone official built-in power-saving mode, you can increase the standby time of about 3 hours, want to use only the power to support the home to rely on low-power mode charge it! (When the battery will turn orange)

"Settings" → "Battery" → Turn on "Low power consumption mode"

2. Avoid App in the background quiet power consumption

Usually App actually in the background to re-organize the content, is a major factor in the consumption of electricity! Turn off this feature will reduce or turn off the message fetch, background App automatically organize, automatically download, part of the visual effects, to extend the phone's use of time. Can be avoided after the closure of mobile phones in the open mobile data, the background constantly updated content, and power consumption and increase the amount of network.

"Settings" → "General" → "Background App Refresh" → Close "Background App Refresh"

3. Disable dynamic effects

Although the dynamic effect can be more fluent in the use of experience, but will increase the power consumption slightly.

"Settings" → "General" → "Use" → "Reduce dynamic effects"

4. Increase your screen contrast and reduce transparency
Turn on "deepen the color" and "reduce the transparency", so that the screen will not be too bright, eyes do not look too tired!

"Settings" → "General" → "Use" → "Add to Compare"

5. Turn off Bluetooth, Wi-Fi

Many users are accustomed to these two functions open, but in fact go out, do not remember to use it when you turn off, or iPhone will always search for Bluetooth Wi-Fi!


These five methods for the iphone battery life is still a great help, but you have to recognize the fact that: iphone battery life is limited, basically fully charged 500 times, the battery capacity will be drastically reduced, Therefore, you need to replace the new battery to be able to fundamentally solve the problem. It is recommended to buy iphone on the Internet to replace the battery users, to choose a third party website with credibility, such as: mpbatt, ifixit, etc.

Let iphone battery durable five program settings

Iphone battery life has been much criticism, the use of frequent people, often one day charge three or four times. So how to get rid of this dilemma? In fact, we can set up through some procedures, you can make iphone battery life in a hurry to greatly improve. The following introduction will tell you how to do it?

Level set one, turn off the APP push message. Apple mobile phone download APP after the first time to open the user is prompted to allow you to send a notice, then you have to choose not allowed. Some APP push message every few minutes there will be one, these messages both fee and fee, go quickly to turn off it.

Program set up two, close the background application refresh. Even if you are not using this APP, but the background application refresh will make the application in the background is still running, and use your traffic and power. Of course, this will not affect the timely push of communication software, the proposed or early closure.

Program set up three, turn off the unnecessary positioning services. In fact, in addition to the need to know the nearby routes, traffic conditions and nearby facilities, many times, we are not on the positioning system. In particular, there are many APP is not the right to have permission, turn off the APP's positioning authority, not only did not affect, but also increase the battery life, why not shut it?

Program set four, turn off Siri. Siri's use is not large, in addition to boring when molested it, and no substantive effect. Siri also need to use the flow, so for this type of application, turn it off to a certain extent, play a role in saving power.

Program set five, reduce the screen brightness. Mobile phone parts in the screen is the most power, the phone's brightness down, both eye can also be made battery life. While the phone can automatically lock the screen time is shortened, you can also play a role in improving the duration of life.

Of course, if your iphone battery damage caused by short battery life, the best way is to replace the new battery.

This article is provided by pei, he is a mobile phone technology concern, he had just searched the Internet iphone 6battery replacement the word several times, for his cell phone to buy a high quality, low cost iphone 6 replacement battery

Quickly replace iphone 6 battery

Iphone 6 battery use more than 500 times, it will only 80% of the electricity, then your phone life will become very short, you need to always charge, which is undoubtedly unacceptable. Why replace iphone 6 battery? Replace the iphone 6 battery, you can make your iphone 6 battery life to be reborn. The following will provide you with the details of the replacement iphone 6 battery steps, you can easily replace the battery.

Replacement of iphone 6 batteries required parts and tools:

Iphone 6 battery replacement

IPhone Repair Kit, Buy Now

Step 1: Find the phone lightning interface (two pentagon screws on both sides.

Step 2: Turn off the phone and use the pentagonal screwdriver in the kit to remove the screw.

Step 3: Use the suction cup to pull the screen above the home page key.

Step 4: Use the plastic sheet in the kit to pry out the screen.

Step 5: Set the screen to 90 degrees, but do not exceed this angle.

Step 6: Locate and remove the screws that secure the screen.

Step 7: Open the connector on the screen.

Step 8: Remove the battery connector cover.

Step 9: Remove the battery connector.

Step 10: Heat the back cover with a hair dryer to soften the glue.

Step 11: Use a credit card or plastic paddle to pry the battery slowly.

Step 12: Connect the new battery and fold the connector.

Step 13: Reattach the screen connector, reinstall the metal protective cover of the battery and the screen connector.

Step 14: Close the case and install the screws.

Put the screen back into the chassis, you first need to move down a few millimeters, and then slide up into the case, but be careful not to stretch the screen protector. Next, twist the small screws on both sides of the lightning interface.


These are the complete steps to replace the iphone 6 battery, you follow this tutorial to replace, is undoubtedly very simple.

Easy to make mobile phone battery explosion of four kinds of wrong charging behavior

The safe use of mobile phone batteries is the focus of our attention, especially Samsung NOTE7 battery broke the news after the incident, the topic even more attention. So you know what? Their phone battery to charge some of the wrong behavior, often there can be a very big hidden trouble. Therefore, to prevent mobile phone battery explosion, it is necessary to start from the correct charging behavior. The following will introduce four wrong cell phone battery charging behavior?

1, with a non-qualified charger to charge the phone

There are two kinds of chargers can be regarded as qualified, one is the original mobile phone charger, a regular third-party mobile phone charger. Do not use low-quality third-party chargers and charging lines.

To purchase high-quality third-party mobile phone chargers and charging lines, please visit the following link directly:

IPhone 5-7 USB Data Cable

IPhone 4S USB Data Cable

For Apple IPhone Adapter (US Plug)

Samsung Charger (USB Data Cable + Plug)

HTC Charger (USB Data Cable + US Plug)

There is also a misunderstanding need to pay attention: high-voltage third-party charger can charge a low-voltage mobile phone, but can not use low-voltage charger to charge high-voltage mobile phone. The reason is that if you use a low-voltage charger to charge the high-voltage mobile phone, the charger will always be in accordance with the maximum design load to charge the phone, not only the charging speed is slow, and a long time the charger is easy to burn even burn accident.

2, with the power of electricity before charging

Many people have such a bad habit, to use the phone power is very low or even run out before the phone charge. This habit is actually the battery damage is very large, will shorten the battery life, so that battery capacity shrink.

The best way to charge is to charge 20% to 30% of the time when the charge, so fast charging, no damage to the battery.

3, Dai Dai to the phone charge

Some people's mobile phone wearing a rubber or plastic shell, charging time does not take down directly to the phone charge. This is not a big problem, but when the phone is generally hot, so the phone shell will be heated, which brings some harmful volatile substances. So, for good health, it is best to take off the jacket and then recharge.

4, while charging while playing mobile phone

Charging the phone itself when the fever, if this time to light up the screen to play the phone, the heat to play even greater. If it is just used with low-quality charger, then it is easy to occur security risks. So, for their own life safety, when charging or do not play the phone.


I suggest you check whether there is any of these wrong charging behavior, if there is, please correct!

Damage the cell phone's four stupid wrong behavior

Mobile phone battery damage in addition to life-limited impact, the user will be largely wrong, incorrect, seemingly stupid charging behavior related. So, if you want your cell phone battery more durable, then it is necessary to correct these ridiculous charging behavior. The following is about the wrong cell phone battery charging behavior:

1. Use non-original charger and data cable

Each charger's voltage and output current are not the same, and the quality of the data line is relatively large, usually support the fast charge function of the data line than the rough one. So you should try to use the original charger and data cable. If you feel the original is too expensive, you can also third-party high-quality charger and data cable.

To purchase high-quality third-party mobile phone chargers and data lines, please visit http://www.mpbatt.com/

2. Charging in high temperature or low temperature environment

Mobile phone charging should be carried out at room temperature, can guarantee the stability of mobile phone battery performance. If the high temperature and direct sunlight in the environment, the phone is difficult to evacuate the internal heat, will lead to internal failure of the phone. Low temperature charging should not be less than 33.8 (° F).

3. Use while charging

If you do not worry, it is best to do the shutdown charge, which is the best
 maintenance of the battery. And the value of the radiation generated by the phone when charging is several times the usual day.

4. Charge with a mobile phone case

Many people like to wear a protective cover for the phone, to avoid scratches or fall. But I suggest you try to remove the mobile phone sets when charging, especially in the case of mobile phones have been fever.

If your cell phone battery has been damaged, or directly replace the phone battery, it is strongly recommended that you buy high-quality mobile phone replacement battery, so as to protect the phone has a lasting battery life.

To purchase a high quality mobile phone replacement battery, please visit the following link directly:

Iphone 6 battery replacement

Iphone 5s battery replacement

Samsung galaxy s4 battery replacement

Lg g4 battery replacement


Other models of mobile phone replacement battery

Cell phone battery using four errors, can not be forgiven

In the use of mobile phones, many people for mobile phone batteries often have some errors, seemingly funny, but in fact stupid, simple unforgivable. The following summary of the user in the use of mobile phone battery on the existence of errors, for you, if there is a similar behavior, please correct!

Mistakes can not be charged every night

Now the use of mobile phones are lithium batteries, have overcharge protection, but also to prevent most of the local overheating. The slightest bit of this misunderstanding is that, ideally, if you want the battery life to be the best continuation, then you should not fill the battery, nor should the battery run out, because doing so damage the battery life. But do i have to do that? Non-also, my equipment has a useful life, I would like to charge to charge, do not worry. Because this is really not so much impact on the battery, unless you want to have been using this battery, such as with a three-year class, or no problem.

Misunderstanding 2, do not use your equipment when charging

While charging side calls

The misunderstanding of the media has been widely reported that the mobile phone in the hands of someone or face side of the explosion, and the parties will be charging while using the phone, this kind of thing is indeed possible, but so far are special cases and not necessarily the phenomenon , And such things almost touched. Because you are just charging the side, while talking about it.

Mistakes Third, you should not use a third party charger

You should know that, in addition to the original accessories, the market has a lot of good quality or even reliable third-party charger, but we are widely accepted is the third party charger charging effect is not ideal, or the original charger to charge fast some. At the same time you should pay attention to the charger specifications, it needs to be consistent with your phone's charging specifications, and sometimes the two are not exactly the same, then that may lead to problems. Another problem with third-party chargers is quality, and you may buy a charger that is worn or easily worn, resulting in a flaming house. So in the charger specifications, to be more careful.

If you need to buy high-quality third-party mobile phone charger, you can directly visit http://www.mpbatt.com/ 

Mistakes four, the phone to stay in the car or let it experience the sun and rain, this reason seems not more simple, but obviously for some people, they really think so. Do not leave your electronic equipment in the car! The car temperature is too high or too low, obviously you will not want your equipment inside the water or condensation, because the long past these water will shorten the life of the internal components of the phone, which should pay special attention. At least if you have to be in a very hot weather like the sun to throw the phone in the car, put it as below or in the cabinet, do not let it face the sun, the phone really could not hold.

The four on the use of mobile phone battery errors have been clearly described, if you have what is not clear where you can give us a message exchange!


This is provided by pei chen, he is a mobile phone technology enthusiasts, at the same time, is also a mobile phone DIY enthusiasts, he has just searched the Internet iphone 6 battery replacement the word four or five times, buy high quality, low cost Iphone 6 replacement battery, used to replace its dead battery.

Three ways to delay the aging of mobile phone batteries

Mobile phone in use, the first component is the aging of the battery, and now the vast majority of mobile phones do not support the battery can be removed, so the phone battery damage, replacement is very troublesome. Therefore, want to delay the aging of mobile phone batteries, for you, you should learn to the maintenance of mobile phone batteries, so that it becomes more durable. The following is to teach you how to delay the aging of mobile phone battery method:

1, refused to poor quality charging equipment, whether it is data cable or charger, in addition to the speed of mobile phone charging can be decided, the impact of mobile phone battery life is also essential.

And low-quality charging equipment in addition to charging speed can not be guaranteed, for mobile phone security there are huge hidden dangers, so the original accessories or third-party authorized brand accessories is your only choice.
Buy high quality mobile phone charger please visit http://www.mpbatt.com/

2, less use of charge Po

Now almost everyone has a charge treasure, but we do not recommend too much use of the charge treasure. In addition to charging treasure market good and bad factors, the charge of the charging voltage and current stability can not be compared with the charger, so the charge can only be used to charge the treasure can not be used too frequently.

3, try to avoid PC charging

PC's USB interface is generally available to the phone's power supply for the 5V, 0.5A, and now many mobile phone charger power is greater than this value, so the PC's USB power supply is not only slow, and there will be voltage instability.

Moreover, the quality of the computer USB interface, we can not distinguish between good and bad, so the use of chargers to charge the phone is the best choice.

4, do not use the phone to shut down and then re-charge a lot of users often use the phone to appear low-power reminder or even shut down after charging, so no doubt that the current mobile phone lithium battery damage great.
If your cell phone battery has been damaged, it is best to replace the mobile phone battery, this is the most cost-effective approach. Remember, be sure to replace the high quality mobile phone battery.

Now buy high quality mobile phone batteries, you can directly access the following links:

Iphone 6s battery replacement

Iphone 6 battery replacement

Iphne 5s battery replacement

Samsung galaxy s4 battery replacement

Samsung note 4 battery replacement

Lg g4 battery replacement


Other models replace the battery

Teach you to quickly replace iphone 6 battery

Iphone 6 battery is often the first cell phone damage, like this phenomenon, only need to replacement a new iphone 6 battery, you can easily solve the problem. If you want to replacement your iphone 6 battery, you can look at the following related tutorials.

Required tools:

Iphone 6 replacement battery

Special screwdriver

Picking the screen sucker

Replacement steps and methods:

1. Open the iPhone 6 ​​you only need to unscrew the two screws

2. Turn off the phone and use the pentagonal screwdriver in the kit to remove the screw. The head of the screwdriver is small, but it matches the small screw at the bottom of the iphone 6.

3. Use the suction cup to pull the screen above the home key. The sucker fixed in the home button on the top of the other hand holding the fuselage, and then pull out. You only need to pry between the screen and the fuselage enough to plug into a plastic sheet of space.

4. Use pry pieces to pry out the screen. Start from the home page key around the screen bit by bit.

5. Position the screen up 90 degrees, but do not exceed this angle. The top of the screen is still connected with the fuselage, so do not pull hard.

6. Locate and remove the screws that secure the screen. It is a good idea to remove the screen when removing the battery, because the battery is fixed with glue, it may be cumbersome to remove it. Unscrew the screws on the protective cover and remove the protective cover

7. Unscrew the connector on the screen. There are several connectors between the screen and the fuselage, you can use a small dial or thin nail file to pick them out from the port.

8. Remove the battery connector cover. The battery connector cover is secured by two screws, unscrew them, and then remove the metal cover

9. Remove the battery connector. There is only one connector between the battery and the circuit board, you can use a small dial or thin nail file to pick it up.

10. Heat the back cover with a hair dryer to soften the glue. IPhonee 6 ​​uses a lot of glue to fix the batteries, they need to soften the battery to take down. You can use the hair dryer to heat the phone back cover, to soften the purpose of glue. Do not use the heating tool with a higher temperature than this, to be comfortable with the heat that will put the phone in hand for the degree.

11. Use a credit card or plastic paddle to pry the battery slowly. You can use a bank card, thin paddle or file to pry the battery at the bottom a little bit. Avoid the top of the screen connector near the part, because the following also hidden connector. Also, do not take the phone parts when prying the fulcrum of the battery. Try to keep the glue on top of the case, so that you can re-use it later.

12. Connect the new battery and fold the connector. If you do not have too much glue left, you can use the ultra-thin double-sided adhesive to fix the new battery. The connector only needs to be able to return to the slot with a little bit of force, but the alignment position may be a bit cumbersome and takes some time. The original battery connector is folded down, so now the same. As shown, you can press it with a small dial or thin metal file.

13. Reconnect the screen connector, reinstall the metal protective cover of the battery and the screen connector. Follow the screen connector in the reverse order, starting with the connector on the top of the fuselage and reinstalling the metal protective cover. Close the case and install the screws.


In this way, your iphone 6 battery is easily replaced.

Teach you how to extend iPhone battery life

If you are a iphone users, and feel the iphone battery life is always not enough, then you can try the following described these methods:

1. Settings - Bluetooth, do not need to use when the closure.

2. Settings - personal hot spots, this feature can share their own network, so that other machines can not use the Internet with your traffic, when not remember to shut down.

3. Set - operators, the signal will continue to search for poor operators, manually select their own operators.

4. Settings - Notification Center, turn off unwanted prompts, turn off all options, such as the application icon mark, sound, and in the notification center.

5. Settings - General - Auxiliary function - Enhanced contrast, close the notification bar and control center after the effect of glass, power consumption significantly reduced.

6. Settings - General - Accessibility - Reduces the dynamic effect, turning on this feature can drastically reduce power consumption.

7. Settings - General - auxiliary function --AssistiveTouch, that is, white point, you can simulate the Home button, enable this feature will be a substantial power consumption.

8. Settings - General - background application refresh, it is recommended to close, this feature is not only power consumption, but also consumption of traffic.

9. Settings - privacy - positioning services, first open the location, and then close the following unnecessary system items and software, or the next open positioning, all software is refreshed.

10. Settings - iCloud, backup their own information to the cloud, on demand off.
11. Settings - mail, address book, calendar, can be closed off, as well as access to new data do not forget, on demand to close.

12. Settings - Information - iMessage, on demand off.

13. Settings - iTunes Store and App Store, will automatically download the items under the option are closed.

14. Settings - Cellular movement data, remember to turn off when not in use.

15. Settings - General - date and time, turn off automatically set the time zone.
16. Home screen - Pull-up control center - Turn off AirDrop. IPhone 5 above device, click - disable. Go to Settings - General - Access restrictions, you can completely turn off this feature.

Of course, if your iphone battery loss has been very serious, then the best way to replace the battery, so that you can make your iphone battery life back to the original state.

Buy high quality iphone replacement battery link:

Iphone 6s battery replacement

Iphone 6 battery replacement

Iphone 5s battery replacement


Other iphone models replace the battery

Methods four keep the cell phone battery is durable

Because now mobile phone basically adopt sealed design, therefore, once the cell phone battery is damaged, replace the up is very troublesome.For you, therefore, should be early curing mobile phone batteries, so as to make it more durable.
The following method will teach you how to do?

1. The charging following from demolished

In order to protect the cell phone fuselage, prepared the following from a lot of people and time to cell phones, but the quality is uneven, following some cooling ability is very poor, wear to chassis charge, lead to cell phone fever, also has a great influence to the capacity of the battery.

2. The screen brightness to control

To cell phone battery life is longer, the proposal to change the current screen brightness.

Bring up the control center, start the "automatic brightness adjustment can be regulated according to the light automatically adjust the screen brightness, improve the battery life of mobile phones, is equivalent to keep the cell phone battery is more durable.

3. Turn off the data without mobile phones

Cooked in flow is not only the money, and battery life, so you don't have to phone when to switch off the data and battery is fast, the cell phone battery is also a kind of damage.

4. Don't put the phone in high temperature

Mobile phone is very afraid of high temperature, high temperature environment, mobile phone will follow fever, bad for the battery.

If your battery has been damaged, only need to replace the battery can, do not need to change a new mobile phone, this is also more cost-effective a solution.Want to buy high quality mobile phone batteries, advice directly to mpbatt.com

Teach you step by step to replace the iphone 6 battery

Iphone 6 battery using the 300-500 cycle charge, it will be 80% of the remaining power, this will undoubtedly greatly reduce the iphone 6 battery life, therefore, replacement iphone 6 battery has become the best choice, which is the most Cost-effective solution. If you replace iphone 6 battery, the following replacement steps will undoubtedly help you!

Replacement before preparation:

1. iphone 6 replacement battery, you can directly access mpbatt.com, buy high quality, low price iphone 6 replacement battery.

2.Repair Fix Kit, Buy Now

1, first turn off the machine, and then use a screwdriver to remove the bottom two fixed screws

2, the screw removed, the use of ready to open the screen to help open the screen

3, because the edge of the screen 6 did not use glue, so the screen is easy to open

4, opened the screen slowly from the bottom to the top of the open

5, the screen erected 90 degrees, and then find a fixed thing, with rubber band fixed live

6, if the veteran can directly replace the battery, wireless dismantling the screen

7, and then remove the power supply btb fixed cover screws

8, with a tweezers to remove the fixed cover

9, with a pry bar to btb disconnect

10, then remove the screen btb to secure the cover screws, and then remove the cover

11, with a pry bar to disconnect the screen cable one by one

12, with a pry bar to disconnect the screen cable one by one

13, so that the screen can be successfully separated

14, then twist the bottom of the battery with tweezers easy to pull tape

15, hand pull the tape one by one pull out

16, hand pull the tape one by one pull out

17, hand pull the tape one by one pull out

18, to be easy to pull the tape all pull out the battery can be easily removed, and if the easy to pull the tape pull off the use of plastic sheeting pry out

19, the new battery paste into the battery into the battery slot

20, the screen cable one by one on the buckle

21, and then install a fixed cover and screws

22, the power supply btb buckle and put on the fixed cover and screws

23, the top of the screen first into the fuselage, and then slowly close

24, pay attention to the screen must be closed from the top

25, and then slowly cover the screen, cover carefully press the lower edge, so that they are homing to the correct location

26, and finally put the bottom two fixed screw boot can be used normally. (Note that the battery must be installed after the test and then sealed, to avoid problems caused by the second disassemble unnecessary trouble)

These are the replacement of iphone 6 battery the whole process

Three use common sense about the cell phone battery

A growing number of mobile phone battery support sealed, but mobile phone battery and have limited service life, therefore, better use of mobile phone batteries, make its more durable, can greatly reduce the probability of replacement battery, it can reduce a lot of unnecessary trouble for yourself.

Below we to get to know a few about mobile phone battery use common sense:

1. You can charge their phone all night

Now smartphones have protection mechanism in charging part, sometimes you will find that the charging 50% 80% soon filling the front, back, will become slow, this is because when the battery reaches a certain power, will be in the form of a given flow charge (a small amount of power supply) for power supply, this not only slow down the current, can prolong the service life of the battery.

2. Try to make the original charger

If you use inferior charging equipment in addition to charging speed cannot be guaranteed, the truth and there is no evidence that inferior will damage the battery charging, but as far as possible with the original charger, easy to cause the battery heat current instability, such as all kinds of faults and short service life of the battery.
But of good quality and stable output current of the charger is the precondition for the battery work normally, charging baoying as backup temporary power use, and use power very much.

Want to buy high quality mobile phone charger, please direct access to:

iphone charger, Buy Now

Samsung charger, Buy Now

HTC charger, Buy Now

3. Don't wait for no electricity to charge

Long-term, not the nickel cadmium battery before charging, discharge, easy to leave a mark inside the battery, reduce the battery capacity, battery memory effect.
But now most of mobile phone use rechargeable batteries use lithium battery or lithium ion batteries, memory effect will not occur.

After the battery is full, the built-in chip will prevent them to absorb the excess current, so the excess current does not flow into the cell phone battery and the so-called charging cycle is not entirely without power to charge, if you really put mobile phone no electricity charge, it will hurt the chemical activity of the lithium ion battery inside, down battery wear will be more serious for a long time, but now the smart phone is more and more "smart", almost won't let the battery totally without power to shut down, but the critical point will start protection measures to shut down, also said that you see no electricity shut down, is not really don't have any electricity.


Want to learn more about the content of the cell phone battery, please direct access: http://www.mpbatt.com/

Achieve iphone 6 faster charging method

Iphone 6 does not support fast charging technology, but you can through some other technical means to speed up the iphone 6 battery charging speed. What will you do next?

The first trick is to use the iPad charger. IPad charger specifications for the 2.1A / 12W, iPhone charger specifications for the 1A / 5W, you may think that the use of iPad charger to help iPhone 6 charging will damage the battery, in fact, do not worry, because Apple's products are equipped with chip control Power input, will not let too much traffic into the phone. And there have been users in Mobile 01 measured that the iPhone itself, the actual output of the charger is less than 1A (about 0.7A to 0.8A), but the actual output of the iPad charger can reach 1.6A to 1.7A, so with the iPad charger Charge the iPhone, you can let the phone eat full 1A current, so the speed is naturally faster.

The second trick is also quite simple and quick, that is, when the flight to open the flight mode. When you shut down or enter the flight mode, the phone no longer need to provide power to the network signal, push function. In addition, if you want to quickly charge, please do not charge while using the iPhone, please press the power button to turn off the screen. When the screen is off, you can still receive a phone or text message, but if you touch the screen will not have other effects. But after the charge is good, do not forget to fly back to normal mode of flight mode, so as not to receive calls or text messages.


This article from mpbatt.com, we are a leading mobile phone online supplier, good quality, cheaper price, much affirmative. If you need iphone battery components, please visit the website mpbatt.com directly

Step by step to teach you to make iphone charge faster

Iphone does not support fast charging function, which has to say is a very regrettable thing. However, you can through some other ways to speed up the iphone battery charging speed. The following to teach you how to step by step to achieve?

First you can use the iPad's charger to charge the iPhone.

In addition, you can open the flight mode, in this mode to charge, it will speed up the charging speed, of course, to consider the current there is no important thing.
You can also shut down the charge, it can also increase the speed, because the phone is connected to the normal boot network, the background program will charge power when charging, so the charging efficiency will be very low.

The next is the temperature problem: the temperature is very low environment (32 ℉ below), there will be slow or no charge of the situation, there is such a situation, the phone to get a little higher temperature charging; High will lead to slow charging, the appropriate temperature range is 50 ℉ ~ 95 ℉ or so.

Finally, you can clean up the dust: often slow and do not charge into the charge, change the data lines and plugs can not be resolved, then it is necessary to check whether the charging interface is blocked, and this is the most easily overlooked, you can use a toothbrush (dry Or dipped in detergent) to brush back and forth, or use a toothpick, etc., be careful to clean up the dust or dirt.

Let iphone battery charging method faster has taught you, you can follow these methods try!


This article is provided by mpbatt.com, which is a leading online supplier of iphone batteries, capable of providing high quality, lower price iphone replacement batteries, and you can be assured of access.

Make your iphone 6s battery more durable three good ways

For those who worry about their iphone 6s battery will be prematurely damaged users, may wish to learn the following four methods, which for improving your iphone 6s battery life will be very helpful.

Make your iphone 6s battery more durable three good ways

One, do not put the battery "fed" too full

Some people say that mobile phone battery charge to 100% and then continue to charge a period of time will be better, the actual is not the case. If the battery is still charged after charging, such as plug in the charger to go to bed, then pull down the morning, it will cause a little decline in battery performance, such as a long time will cause significant impact. The best way to do this is to pack 100% of the time, unplug the charging line. In order to avoid continuing to charge the battery damage, the phone is best not always connected to the power line.

Second, iphone 6s battery is afraid of heat

There are common sense of the users are clear, lithium batteries most afraid of heat, if the average temperature of the environment is 40 ℃, then the cell phone battery capacitance loss than the average temperature is 25 ℃ increased by 35%, the loss will increase with the temperature increases, The ambient temperature is higher, the damage to the battery will continue to increase, is not feeling very shocking?

The correct practice So, in the daily use of the phone should be away from heat, not to be placed in the car by the sun direct.

Third, never let the power down to 0

When we use the phone, often because it can not be charged in time to zero power. In fact, when the power really to 0, the battery will appear unstable, and even charge the state of danger.

Perhaps we do not know, in order to prevent prolonged unused battery explosion, lithium ion has a natural "self-destruction program" so that completely drained battery reimbursement. The correct approach This mechanism is great for security, but it is only a little effort to do it. Also we need to pay attention to is not to let the battery idle for too long or used too clean like.

Learn these three methods, you can avoid premature replacement iphone 6s battery. Of course, if you have any good way to make iphone 6s battery more durable, may wish to communicate!

Iphone 6 battery is not durable? Need to replace iphone 6 battery! NO

Many iphone 6 users of mobile phone battery is not durable, often use four or five hours without electricity, and that is the aging battery, the need to replacement new battery. In fact, this is not the case, and sometimes may be some of their own mobile phone program settings lead to battery is not durable. Then the following to introduce several lead iphone 6 battery is not durable settings?

Iphone 6 battery is not durable? Need to replace iphone 6 battery! NO

1. Geographical location sharing

Is actually a big charge to kill the device. In the "Settings - Privacy - Location Services", we can unselect the unnecessary geographical sharing.

2. bluetooth

Nothing can be turned off. Although Bluetooth power consumption is minimal, but as long as it is open, it will continue to search for paired objects.

3. message push.

Consider which applications are important and only keep the necessary ones. To know that every time the screen is pushed when lit, but also when the power is slowly lost it. In the "Settings - notice" can be found.

4.iOS10 in the "background application refresh"

This feature, in the "Settings - General", allows the application in the background to refresh the content, turn off the application does not need to refresh can save power.

5. "Reduce the dynamic effect" This new option in the "Settings - General - Accessibility" in the. As the name suggests, it can reduce the dynamic effects of the interface.

6. In the auxiliary function, there are a lot of "energy saving" options, such as contrast, grayscale, voice and so on. If you do not want, you can also set according to their own preferences.

7. Reduce the brightness. If you are not very sensitive to brightness, you can manually reduce the brightness. Imagine, every time you turn on the phone, the phone because of the display and the consumption of light will be much less?


If the user exists above these mobile phone settings, then please change in time, believe that their mobile phone battery life will have a big change. Of course, if still does not work, then you can only replacement new iphone 6 battery.

Thorough discharge recharge, iphone 6 battery in the end okay?

For the iphone 6 has been in a state of large power consumption of the user, mpbatt.com recommended users: the use of not more than two years under the premise may be entered the "virtual state", the need for a thorough discharge once again charge. Then there may be users will ask: "Do not discharge the battery completely hurt?"

So, completely discharge and then charge, iphone 6 battery in the end okay?
First of all, there is "virtual state" is basically because of personal habits and poor charging habits caused by the "virtual state" need a complete power cycle to improve! That is, a thorough discharge and then charge.

IPhone 6 battery is a lithium battery, and the past cell phone nickel zinc battery completely different! Lithium battery whether it is "fully charged" or "part of the charge" will not affect the battery life. However, after a full discharge, a long time do not but will damage the battery!

Please note! Is a long time after the discharge will not damage the battery, under normal circumstances the battery is basically no damage.

Add: do not intend to use the phone before storage with the best 50% of the power! Because the battery is completely discharged after a long time storage, most likely lead to complete damage to the battery, and the battery is fully charged and then stored, it may lead to reduced battery storage capacity, shorten the battery life.
"Virtual state" generally occurs for each time / 3 months, and there are only two solutions:

First, the complete discharge to a power cycle.

Second, spend money to replacement iphone 6 battery.

Through the above description, we can see that the full discharge and recharging is feasible, the best 1 to 3 months for the battery completely to a charge and discharge, so not only can lift the "virtual state", but also improve the whole Power cycle, to maintain electronic mobility!

Six habits, directly destroy your hands iphone 6

Iphone 6 users have a lot, but some people use the good, some people use the life cycle is relatively short, there are many users of the habits are gradually damaged in the hands of the iphone.

Six habits, directly destroy your hands iphone 6

1,24 hours boot

Now few people have to go to the phone off, basically 24 hours are boot state, but this is the battery consumption is also great.

2, WIFI and Bluetooth has been opened

Now the smart phone, WIFI is a necessity, no WIFI holding the phone is also nothing to use, but Bluetooth has not been open, Bluetooth is actually very waste battery.

3, used in extreme ambient temperatures

In extreme weather, iphone 6 life will be greatly reduced. We all know in the winter of low temperature weather, the phone will be shut down for a while?

4, power consumption automatically shut down before charging

Iphone is now using the lithium battery, do not wait until the automatic shutdown before charging, this is not good, you need to leave the remaining power

5, do not use the original data cable charging

Do not use the original data cable is the biggest damage to the iphone 6, serious can damage the battery, in this case, the user had to replacement iphone 6 battery.
6, do not clean iphone


Presumably a lot of people do not know how to seriously clean up? This may be noted

Three wrong iphone 6 charging habits, do you have committed it?

Iphone 6 battery durability has been the user Tucao slot, then whether it is caused by our charging habits?

You know, a lot of people to iphone 6 to add power when some bad habits will be depleted battery, which will be invisible to the battery. Therefore, in order to make their own iphone 6 battery more durable, to avoid premature replacement iphone 6 battery, it is necessary to put an end to the wrong charging habits to work.

Three wrong iphone 6 charging habits, do you have committed it?

1, regardless of time to iphone 6 charge
This will cause the phone to charge the pressure, over time will consume lithium battery life.

2, can charge to charge

Do not wait until no electricity

3, do not let the phone has been hot

If you find the charge iPhone hot, you should unplug the charging power. Pause charging


In fact, these three wrong habits not only iphone 6 battery is not good for any type of smart phone battery is not good.

Do not want to replacement iphone 6 battery, we must put an end to five kinds of wrong charging habits

To charge the iphone 6, some of the wrong charging behavior will seriously damage the battery. Therefore, in order to make their own iphone 6 battery more durable, it is necessary to start from the correct charging behavior. Here we come to a specific understanding:

Do not want to replacement iphone 6 battery, we must put an end to five kinds of wrong charging habits

Wrong one: iphone 6 battery completely no electricity and then recharging.
General mobile phone power is less than 20% when prompted to charge, and lithium battery in the case of extreme no electricity will cause damage to the battery, which will shorten the battery life.

Error 2: Charging all night does not turn off the power.

Many of my friends will be charged for the convenience of the night, and because sleep did not turn off the power, to pull the line in the morning. This is the wrong way, because the lithium battery will be fully charged after the automatic power off function, but after the power out of the battery will let the battery has been fully charged, will speed up the battery capacity loss rate.

Error 3: Minimize charging to extend battery life

Lithium batteries can generally use hundreds of cycles of electricity (a cycle for a full capacity of a battery), and no memory effect. And frequent charging helps to extend the battery life, therefore, in the battery after charging to reduce the number of charging and can not extend the battery life.

Error four: while playing while playing the phone.

This will extend the phone charging time, and hurt the phone, the screen backlight is the phone's larger power consumption, charging the phone will automatically determine the power supply to the power to give more than the screen backlight, resulting in slower charging speed, mobile phone heat , Resulting in a lot of temperature increases, from injury to the original battery.

Error five: indiscriminate use of the charger.

Charging the best use of the original charger, is conducive to protecting the battery safety, some cottage charger quality uneven, there is instability in the current situation, the battery will have a certain impact.


If the user has the above five kinds of wrong charging behavior, it is necessary to correct as early as possible.